M72HD

The Harmony Enterprises M72HD High Density Vertical Baler – the best in maximum space and labor efficiency. The M72HD is Ideal for: Manufacturing Facilities Industrial Applications Recycling Applications Distribution Centers

The M72HD is the most productive vertical baler on the market today. Its incredibly fast 28 second cycle time and large 40 x 72 x 40 inch charge chamber allows one to bale over 2,000 lbs. of cardboard per hour. The massive 7 inch cylinder and 20 horsepower heavy-duty motor combine to produce over 92,360 lbs. of force resulting in 1,300 lb. bales of cardboard.

These maximum density bales are ejected from the baler by a unique hydraulic eject system that allows the operator full control over bale removal.
This efficiently designed 7,250 lb. power house can ship upright on trailers and be installed without every requiring it to be tipped on its side.

The small 8 x 8 foot operating space allows it to be located exactly where it will do the most good. The new M72HD baler will bale more cardboard in less time and in a smaller space that any other vertical baler on the market.

Outstanding Safety Features
Standard mechanical safety limit switches have been replaced with the tamper=proof, fail-safe magnetic reed safety switches. Magnetic reed safety switches have no external moving parts and cannot be bypassed without specialized knowledge. The Programmable Logic Controller (PLC) shuts down the baler if any unsafe conditions are detected.  To protect employees during manual operation, operators must use both hands to control the baler. All moving parts including the ejector system are totally enclosed. The M72HD meets or exceeds all Federal OSHA and ANSI Requirements. Additionally, the control panel is totally UL listed.

Built to be the Strongest and Most Reliable Vertical Baler on the Market
• Heavy Duty 7 Inch Hydraulic Cylinder with a Massive 22 Inch x 22 Inch x 2.5 Inch Thick
  Steel Mounting Plate
• Separate Heavy Duty 4 Inch Hydraulic Eject Cylinder
• Heavy Duty “Boxed 6 Inch” I Beam Upper Stringers
• Reinforced Floor & Sidewalls for Maximum Ram Pressure
• 4 Sided Nylatron Guided Platen for Smooth, Quiet Operation
• Tamper Proof Magnetic Reed Safety Switches
• PLC Controlled Electrical System
• 2 Handed Safety Controls for Manual Operation
• 20 HP TEFC Motor
• Bale Full Indicator Light for Consistent Bale Height
• Unique Hydraulic Circuit for High Speed Operation
• Hydraulic Ejector Designed to Eject Full or Partial Bales
• 2 piece Split Lower Door to Reduce Operating Space
• 6 Slots for Tying Bale
• Retractable Bale Dogs for Reducing Spring-back
• UL Listed Control Panel
• Shipping Height of 88 Inches Allows Upright Transport
• Built in Fork Slots and Skids for Easy Installation

Features and Specs

Product Number: M72HD
Product Name: Vertical Baler

Description: Standard mechanical safety limit switches have been replaced with the tamper-proof, fail-safe magnetic reed safety switches. Magnetic reed safety switches have no external moving parts and cannot be bypassed without specialized knowledge. The Programmable Logic Controller (PLC) shuts down the baler if any unsafe conditions are detected.

M72HD Specifications Bale Size 40" x 72"x up to 40" (102cm x 183cm x Up to 102cm) Bale Weight - Corrugated Up to 1,300 pounds (590 kg) Ram Pressure 92,360 lbs. (41,895 kg) Cycle Time 28 seconds Cylinder 7" (17.8 cm)Bore, 4.5" (11.4 cm) Rod, 48" (122 cm) Stroke Motor 20 HP Pump 18 Gallon Electrical Power 208/230/460 Volt, 3 Phase, 60Hz Bale Eject Hydraulic / Chain Bale Tying Wire or Banding	M72HD Dimensions Loading Door Opening 28"x 72 " (71cm x 183cm) Unloading Door Height 44.25" (112cm) Overall Height 137" (348cm) Overall Depth 54.50" (138cm) Overall Width 96.25" (244cm) Depth with Door Open 97.75" (248cm) Width with Door Open 114.25" (290cm) Shipping Height Upright 88.25" (244cm) Shipping Weight 7,250 lbs. (3,289 kg) Installation and Operating Area 77.5 Sq. Ft. (7.2 Sq. m)
Specifications subject to change without notice Top of Page